How do I Connect a JVC Receiver RX-809VTN to an UltraVision TV?
The JVC RX-809VTN is an audio-video receiver first manufactured by the company in 1993. It has since been discontinued by JVC. The receiver is equipped with an S-video output jack for connecting to a television. Hooking up this model of JVC receiver to a Hitachi UltraVision TV requires a standard S-video cable. Due to the age of the JVC receiver, digital video connections are not available. The S-video analog connection provides an adequate picture on the Hitachi UltraVision, although it will not be in high definition. S-video delivers standard resolution only.
Other People Are Reading
Instructions
-
-
1
Turn off the receiver and the UltraVision TV to eliminate risk of a power surge that could damage the TV screen.
-
2
Plug in one end of the S-video cable to the video output jack on the rear of the JVC receiver. The pins in the plug must insert in the pattern of holes inside the jack.
-
-
3
Connect the S-video plug on the other end to either of the two S-video jacks on the rear panel of the UltraVision TV.
-
4
Turn on the equipment and press the "Video 1" button on the JVC remote control, which corresponds to the S-video connection with the TV.
-
5
Press the "Source" button repeatedly on the UltraVision remote control until the video signal from the JVC appears on the TV screen.
-
1
References
Resources
- Photo Credit s-video cables image by JoLin from Fotolia.com
