How to Build Soundproof Studio Ceilings

Soundproof your studio ceiling.

When building a soundproof studio ceiling, you must have the proper materials. Studio foam is used to insulate and absorb sound when in the vocal recording booth. Unwanted noise can travel through basic material such as carpet, mattresses and shipping foam, but studio foam provides support for vocals and minimizes noise bleeding from instruments. It is important when soundproofing a studio ceiling that you don't cover the "bass traps," which are the spots where desired sound stays.

Things You'll Need

• Studio foam panels
• Studio foam glue
• Measuring tape
• Scissors

Instructions

1. 

   Measure the ceiling length and width.

   Measure the studio ceiling with the measuring tape. Write down the length and width measurements. Clean the studio ceiling with a damp towel and wait for it to dry.

2. 

   Place foam on ceiling by hand.

   Cut measured squares of the studio foam and place them on the studio ceiling by hand to see if they fit. Resize if the studio foam is too big or too small to cover the desired area.

3. 

   Apply glue to studio foam.

   Apply the glue to the back of the studio foam and press firmly against the top of the ceiling. Leave 1/2 to 1 inch space free away from the wall once you reach the end pieces. Hold the studio foam in place for up to 10 seconds to ensure that it sticks. Apply multiple panels of studio foam until you cover the entire area.

4. 

   Wait 20 to 30 minutes for the glue to dry.

   Wait 20 to 30 minutes for the glue to dry on the studio foam. Place your hand on the panels and try to move them back and forth to see if they are securely in place.

References

• Studio Soundproofing: SoundProof Studio