How to Convert a Garage Into Living Space

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
You can get more living space by converting your garage.

There are many people out there looking to make more living space in their home. If you have a garage, this could be one of the easiest ways to add on to your home without expensive construction. Doing a garage conversion is fairly simple with the right tools. The average do-it-yourselfer can manage the project. This can give you the space you need to add a bedroom, living room or den, or even a game room or family room.

Advertisement

Preparation

Video of the Day

Step 1

Check with your local building inspector to find out about local zoning laws regarding garage construction and conversion.

Video of the Day

Step 2

Determine if there will be plumbing or electrical work in your conversion. These projects are best left to the professionals, but must be inspected by a licensed inspector if you do it yourself.

Advertisement

Step 3

Create a floor plan. The simplest garage conversion is to make it into one big room that can be used as you wish, usually as a family space or a bedroom. A living area likely will have one large open floor plan, where a bedroom may have separate rooms or wall dividers for privacy.

Step 4

Frame your garage door opening. You are not likely going to want to keep the garage door on your converted space. Instead, you want to frame this in with a wall and a door for outside access if you choose.

Advertisement

Step 5

Plan the garage floor. Since garage floors can be very cold, it can make the room uncomfortable and you can lose a lot of heat or air through this room, running up your electric bill. You can correct this problem by raising the garage floor off the concrete slab for insulation. Raise it using 2-by-4-inch lumber, according to how much insulation you need (higher subfloors add more insulation).

Placing the Walls

Step 1

Use drywall to cover the beams in the garage and give you a smooth appearance in the converted living space.

Advertisement

Step 2

Use drywall screws and a drill to secure the drywall into the studs of the garage. Place the screws about every 12 inches. You will need a ladder and another person to help you drywall the ceiling.

Step 3

Mark where you will have electrical outlets and use the drywall knife to cut out a hole for the outlets through the drywall.

Advertisement

Step 4

Repeat the steps until you have covered all the walls in the garage with drywall.

Step 5

Place drywall tape along all of the seams of the drywall.

Advertisement

Finishing and Painting

Step 1

Paint the walls of your converted space in your chosen color.

Use drywall compound to cover the drywall tape and drywall screws. This will allow you to smoothly paint over it.

Advertisement

Step 2

Allow the drywall compound to fully dry and then use drywall sandpaper to smooth down the edges. When completed, you should have a smooth finish that you can rub your hands over without getting caught, snagged or cut.

Step 3

Paint the walls with a primer. This will be your base before painting your converted room in the final color you have chosen.

Advertisement

Step 4

Install the finished flooring, such as carpet or tile, after the painting is complete. This prevents spilled paint from ruining your new floor.

Step 5

If your garage has windows, find window coverings to go with the decor in the new converted space. Now you're ready to move in furniture.

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...