How to Remove Acrylics in a Tanning Bed
Tanning beds need regular maintenance to stay in the best condition and to maximize life of the product. Acrylics should be cleaned after each use, and completely changed after every 1000 hours. You should always make sure you follow instructions closely when working with tanning beds, especially when changing parts such as the acrylics. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Disconnect all power to the tanning bed. It is crucial that you do this before removing parts of the tanning bed to avoid getting shocked.
-
2
Stand in front of the bed. Using the flat head screwdriver, insert it into the acrylic trim strip. Once inserted, slowly begin to pry and grab the edge of the strip. Continue pulling the strip away from the tanning bed unit until it is removed.
-
-
3
Look for the end cap screws on the bed. You may need to loosen these screws before removing the acrylic. It is very important that you do not remove the end cap screws all the way.
-
4
Look for a lip in the bed rail. Use your flat head screwdriver to gently pry the acrylic up and over this lip. You may need some extra help from another person while doing this. Grasp the long edge of the acrylic that is now exposed.
-
5
Slide the acrylic slowly toward you, while still standing in front of the bed, until it is removed. The edges may be sharp, so make sure you are careful.
-
1
