How do I Set the Date on a Xerox Phaser 7300?
The Xerox Phaser 7300 is a color laser printer that is able to connect to multiple computer over a network connection. This printer used photosensitive drums to place the proper amount of toner for each color onto the paper. The fuser then fuses the toner onto the paper creating sharp and crisp images. The printer comes with a IP interface called PhaserLink to view the status and to make system changes including the date and time.
Other People Are Reading
Instructions
-
-
1
Open a web browser such as Internet Explorer, Firefox or Safari. In the address bar, type in the TCP/IP address for the printer and hit enter. If you do not know this address, contact the network administrator in order to get this information.
-
2
Click on 'Configuration' on the PhaserLink landing page. It is located on the left side of the screen and should be the second link on the menu.
-
-
3
Choose 'Configure Printer Defaults' from the list. This will bring you to a screen with several default settings on the printer. At the bottom of the list should be 'Current Date and Time'. Click this link to alter the date and time. There also be a link that says 'Configure Date and Time' this can be selected to access the menu as well.
-
4
Input the correct date and time. Type in the validation password for the printer and click the 'Do/Apply' button. This should bring up a confirmation page. If there were no errors, the screen should say 'Request acknowledged: no errors encountered'. This means that the change to the date and time has been setup properly. If there were errors, correct the displayed errors, and retry.
-
1
Tips & Warnings
Any changes to the network settings should be completed by the network administrator. This prevents any settings from being changed incorrectly.
References
Resources
- Photo Credit ethernet image by Emmanuel Bergère from Fotolia.com
