How to Dissolve Testors Glue

Building models--such as cars, ships and airplanes--is a common pastime for people of all ages.

Testors glue and cement is a well-known product for hobbyist and craftspeople. It is durable, fast-drying and relatively inexpensive. It is not uncommon to accidentally spill or drip Testors model glue onto unwanted areas. If the spilled glue is wet, wipe it up with a damp cloth. Once the model glue has dried, it must be softened or dissolved to remove all traces of the adhesive.

Things You'll Need

• Plastic paint scraper
• Paper towels
• Acetone nail polish remover
• Small container
• 2 cloths

Instructions

1. Remove as much of the Testors model glue as possible, using a plastic paint scraper. Wipe the glue off the scraper with paper towels and discard in a trash can.

2. Pour acetone nail polish remover into a small container. Dip a cloth into the nail polish removed.

3. Scrub the glue with the cloth in a gentle back-and-forth motion. The acetone nail polish remover will help dissolve the glue.

4. Scrub the area gently until all model glue is dissolved. Use the plastic scraper--if necessary--to help remove the softened glue from the area.

5. Wipe the area clean with a clean cloth dampened in cool water.

Tips & Warnings

• Test the acetone nail polish remover on an inconspicuous area of the item. If damage or discoloration occurs, discontinue use and replace with rubbing alcohol.

• Thoroughly wash your hands with soap and warm water after working with acetone nail polish remover.

References

• Testors: Frequently Asked Questions
• Hub Hobby Shop: Hobby Hints
• The Orginial Super Glue: Removing Super Glue