How to Install a Wired Doorbell With Chimes
Installing a wired doorbell with chimes is not a difficult job if you are a do-it-yourself person. While wireless doorbells are more popular than older wired doorbell systems with chimes, the latter may be a less expensive option. With a wired doorbell, you won't have to replace batteries, and you don't have to worry about the speaker being too far away from the receiver to pick up a signal. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Electrical insulation tape
- Insulated screwdriver set
- Ladder
- Power drill with 3/8-inch drill bit
- Insulated pliers
Instructions
-
-
1
Switch off the power supply at the main circuit breaker.
-
2
Mount the door chime button on the wall with screws at the height you prefer. Use the screws that come with the door chime.
-
-
3
Mount the receiver unit in a spot where it will be heard throughout the building. Use a power drill to create pilot holes before screwing the unit to the wall.
-
4
Connect the doorbell wires to the terminal. Attach your first wire to the terminal screw on the door chime button; the wire should run directly from the terminal screw to the button on the transformer. Connect another wire to the next screw on the door chime button, and attach the other end to the terminal screw on the chime. Connect the third wire to the last screw on the transformer and to the terminal screw on the door chime.
-
5
Switch the power back on and test your new doorbell with chimes.
-
1
Tips & Warnings
Be very cautious when working with wires. There is a risk of electrical shock.
Be sure all of your tools have insulated handles that wont conduct electricity.
The main circuit breaker will not shut off power to the wires that extend from the main breakers and run to the electric meter. These will always be hot.
When working with electrical wires, never use non-electrical tape or uninsulated staples.
References
- Photo Credit Hemera Technologies/AbleStock.com/Getty Images
