How to Disassemble and Clean a Dyson DC17 Cyclone

The Dyson DC17 is a high-power upright vacuum cleaner. It features Dyson's cyclone technology for capturing dirt and dust, an extension wand for up to 16 feet of reach and a hygienic bin that allows for emptying the vacuum with minimal exposure to the contents. Even with all of these great features, like any piece of cleaning equipment in our homes, it gets dirty. Regular cleaning of your Dyson DC17 is an important key in maintaining its high-quality power and performance.

Instructions

1. Turn off the vacuum and verify that the cord is not plugged into an electrical outlet.

2. Place the vacuum in front of you to access the front of the vacuum and the clear bin.

3. Remove the clear bin by placing your thumb on the button above the handle. Grasp the handle with an overhand grip. Push the button with your thumb while firmly pulling the clear bin toward you. Tilt the clear bin up and out of the vacuum.

4. Empty the contents of the clear bin by placing it over a trash can. Push the button on the top of the clear bin to release the contents of the bin into the trash can.

5. Wipe the clear bin inside and out with a damp cloth to remove dirt and debris.

6. Remove the filter located below the clear bin. Press button to release the filter. Clean the filter by washing it under your faucet using warm water. Allow the filter to dry for 24 hours before reinserting it.

7. Verify that all parts are completely dry. Reassemble the filter and clear bin. Your Dyson DC17 is ready for normal use.

Tips & Warnings

• Wash the filter every six months under normal use, more frequently if the vacuum is used to clean up fine dust.

References

• Dyson: DC17 All Floors
• Dyson: DC17 Operation Manual