How to Install Woven Wood Blinds on French Doors

French doors are found in many homes today. They provide the functional aspects of both a door and a window. While the light let in by french doors is important, sometimes there is a need to control the amount of light flooding a room. Woven wood blinds are an attractive covering for french doors. In addition to the decorative benefit, the blinds also provide light control and privacy. Since french doors move, it is important to install the blinds properly.

Things You'll Need

• Level
• Tape measure
• Pencil
• Drill
• Phillips screwdriver

Instructions

1. 

   Always use a level when installing any window treatment.

   Measure the width of the shade header and mark this measurement 1 inch above the top of the window on the French door. Use the level to mark this line above the window so that the shade will hang properly. Be sure the line is centered above the window.

2. 

   Pilot holes should be smaller than the screw that will be used.

   Mark the placement of each bracket at each end of the marked line on the door; use the brackets for an outside mount from the installation kit. Drill pilot holes for each bracket.

3. Mount each bracket to the door using a screwdriver and the screws from the installation packet.

4. Place the shade header inside the installed brackets and close the covers to secure the shade. Lower the shade completely to cover the glass on the French door.

5. Attach the wall cleat from the installation packet to the door near the bottom corner of the glass. Attach the wall cleat to the same side as the string on the blinds. Secure the string to the wall cleat to limit the movement of the shade when the door is opened and closed.

Tips & Warnings

• Choose shades in wood tones that complement the decor of the room.

• Attach a wall cleat on both sides to better secure the bottom of the shade.

• Never leave the strings on a shade hanging where small children may become entangled in them.