Instructions for Adjusting Ski Bindings on a Salomon Z12


When adjusting alpine ski bindings of any make and model, be aware that unless you are certified by the specific manufacturer to work on their bindings, any modification you make risks invalidating the warranty. Additionally, you risk compromising your right to sue for damages in the event that the bindings don't operate properly and you are injured as a consequence. All of the major binding manufacturers recommend that you have your bindings adjusted only by trained professionals who hold current certifications and can test them for proper release tolerances. However, if you are a competent skier and don't mind shouldering the above risks, adjusting a pair of Salomon Z12s is actually pretty easy.

Things You'll Need

  • Large, flat-head screwdriver
  • Ski boots you will use with bindings
  • DIN chart
  • Tape measure in millimeters
  • Look up your DIN (Deutsches Institut für Normung) number on a DIN chart. You can usually find charts online (see Resources)--but, again, with the proviso that you assume all risk for their use. Your DIN number is based on your weight, height, age, skier type and boot-sole length. All binding manufacturers publish charts that combine these elements to give you a number usually between 1 and 12. (The Salomon Z12 ranges from 4 to 12.)

    The higher the number, the more force is required for the binding to release. Usually, the sole length of your boot will be printed on the actual boot. If not, use a tape measure to find it.

  • Lock your boots in the bindings. Activate the sliders by releasing the tabs directly below and behind the heel clips on each ski. Use your screwdriver to pop them up and then, with your boots in the bindings, slide the heel clips as far forward as you can before locking them back into place with the tab.

    Typically, if you have had your bindings mounted professionally, this step will be unnecessary. The heel clips of your Salomon Z12s are mounted on a sliding mechanism so that they can accommodate slightly different boot-sole lengths.

  • Adjust the DIN numbers by using the large, slotted screws. The Z12 has easy-to-find indicator windows on both the heel and toe clips. Simply turn the screw in the appropriate direction until the indicator lines up with your DIN number.

  • Ski to test the bindings. If you find that your bindings release too easily, you may have miscalculated one or more of the factors that went into determining your DIN setting. You can try cranking them up in increments of "1" or ".5" until they stop releasing prematurely, but know that you are increasing your risk of injury by doing so.

Tips & Warnings

  • All binding manufacturers recommend that you have your bindings professionally adjusted and tested at least once a year by a certified technician. Typically, shops charge very little for this and it only takes a few minutes to do the job. Professionals will also test your bindings in the shop using a set of specialized torque wrenches that most people are not likely to own. It may be well worth it to pay the fee and ski with peace of mind.
  • Many expert skiers prefer to adjust their own bindings and usually, since they know what they are doing and what to expect, this is not a problem. However, beginner or intermediate skiers should be much more careful in doing so as any mistakes can cause serious injury or death. If you have accidentally set your DIN number too high, there is a good chance that you won't know until it is too late. Your knees are worth a little caution.

Related Searches

  • Photo Credit ski equipment - ski-binding image by Daria Miroshnikova from
Promoted By Zergnet



You May Also Like

  • How to Adjust Bindings to Ski Boots

    To ensure your safety while you're skiing, it's important that you have your ski boots adjusted properly. It's recommended that you get...

  • How to Install Salomon Ski Bindings

    Installing your own ski bindings is a challenging task that requires you to understand your skiing technique, ski technology, the pressure and...

  • How to Adjust Salomon Bindings

    Salomon bindings are high quality bindings used by a variety of skiers. Adjusting the ski bindings is extremely easy, which is a...

  • How to Adjust Ski Bindings

    Skiing is a fun, refreshing sport, but it isn't without risks. That's why all skis come with a binding system that allows...

  • How to Adjust Rossignol Ski Bindings

    In common with all alpine ski-binding manufacturers, Rossignol recommends that you have your bindings adjusted professionally. By adjusting them yourself, you risk...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!