How to Change an Air Filter on a YZ 125

Dirt bikes such as the Yamaha YZ 125 take a lot of abuse and also see a lot of time in dirty areas. This can quickly jam up your air filter, making the engine run poorly because it's starved for air. As a result, every few times you go out riding, you should change or clean your filter to make sure everything functions properly. This is not a difficult process and can be done in less than15 minutes or so.

Things You'll Need

  • Replacement air filter
  • Air filter oil
Show More

Instructions

    • 1

      Park the YZ 125 on a stand so that it won't move or go anywhere. Then lift up the seat and set it to the side.

    • 2

      Reach inside and locate the wing nut holding the air filter to the throttle body. Pull the air filter out of the compartment and set it to the side.

    • 3

      Peel the foam air filter off of the plastic base. Spray the oil onto the replacement filter, if it doesn't already come pre-oiled. Then wrap the replacement filter onto the plastic base.

    • 4

      Reach inside the hole in the frame and install the replacement filter on the throttle body using the factory wing nut. Reinstall the seat.

Related Searches:

References

Comments

You May Also Like

Related Ads

Featured