How to Clean & Treat Old Oak Hardwood Floors

Save

Oak is a durable wood, commonly used in furniture, building frames, veneer production and flooring. Because of its durability and neutral color, oak is one of the most popular types of hardwood floors. Prior to cleaning and treating an old, oak hardwood floor, consider the condition the hardwood floor is in. The finish on the floor dictates whether deep cleaning and treatment is possible or whether they would cause further damage because the finish or seal is no longer efficient.

Things You'll Need

  • Dust broom, soft-bristled broom or vacuum cleaner
  • Vinegar
  • Mop bucket
  • Cloth or microfiber mop
  • Towel
  • Liquid wax or oil floor treatment
  • Test the finish of an old, oak hardwood floor. Dump one tablespoon of water onto a high traffic area. If the water soaks in immediately, either the flooring has not been finished or the finish is worn. If the water soaks in, but it takes a few minutes, the finish is partially worn. If the water beads on the surface of the floor and can easily be wiped away, the floor is properly sealed and the seal or finish is not damaged.

  • Using a dust broom, soft-bristled broom or vacuum cleaner, sweep up all dust, dirt and debris from old oak hardwood floors daily.

  • Combine equal parts room temperature water and white vinegar in a mop bucket. Dip a cloth or microfiber mop in the mixture and remove excess moisture by wringing the mop. Mop undamaged oak hardwood floors as needed to remove dirt, grime and buildup. If the finish or wood is damaged in any way, do not mop the floors.

  • Dry the hardwood floors completely with a towel to remove excess moisture and prevent water spotting.

  • Determine what kind of finish is on the oak hardwood floor. Most oak floors are finished with either a polyurethane or water-based urethane finish or sealed with an acrylic, oil or wax. Run your hand over the hardwood. If you can feel the wood grain, it's likely an acrylic, oil or wax. If the floor feels and looks shiny, hard and smooth, it's likely a urethane finish. If the finish is urethane, no further treatment is required.

  • Select a liquid wax or oil product designed for hardwood floors. Both oil and wax work to restore shine to a hardwood floor, and either can be used on any of the three types of seals. Spray or squirt directly on acrylic, oil or wax-finished oak hardwood flooring in an even coating. Allow the wax or oil to dry.

  • Buff the floor by rubbing a soft cloth or rag in a circular motion. Continue until the entire floor is buffed and appears shiny and clean.

Related Searches

References

  • Photo Credit hardwood floor texture image by GoodMood Photo from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • Old Wood Floor Treatment

    Treating your old wood floors can increase the pride you have in your house as well as increase its value. Refinishing an...

  • How to Clean & Shine Oak Hard Wood Floors

    Oak is one of the most common types of hardwood flooring, and like other hardwoods, it is easy to take care of....

  • How to Use Hardwood Flooring on a Wall

    Install hardwood flooring on a wall for a dramatic effect, or to create an accent or focal wall within a room. The...

  • How to Treat Old Wood

    The treating process of old wood consists of cleaning and sealing. Years of wear and tear can have a significant effect on...

  • Proper Wood Floor Conditioning

    Hardwood floors are easy to install and maintain. They can also last a long time if you take care of them properly....

  • Oil Treatment for Wood

    Although a beautiful natural building material, wood is susceptible to a number of problems which can cause it to deteriorate. Sunlight, water,...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!