Revive the beauty of your wooden doors and save yourself the cost of replacing them by restoring them to their former glory. If your doors are less than welcoming, damaged by sun, water, wear-and-tear, etc., painting or restaining the wood will give your room or front entrance a dramatic upgrade. To paint or to stain is the question: paint tends to hold up better outdoors, but stain brings out the natural beauty of the wood. So decide on the look you’re going for, what conditions the door will weather, and let the restoration begin.
Things You'll Need
- For painting:
- Paint stripper
- Paint stripper neutralizer
- Enamel paint
- Paint brushes
- For staining:
- Wood conditioner
- Staining pads
- Foam brush
- For painting or staining:
- Sanding block
- Tack cloth
- Wood glue
- Wood filler
- Putty knife
- Drop cloths
- Safety glasses
- Rubber gloves
- Drill with screwdriver attachment
Remove the door by taking out the hinge pins. Put your drop cloths under the sawhorses and lay the door flat between the two sawhorses. Remove the hardware.
Strip the paint with a paint stripper (follow the manufacturer’s instructions) if the door is painted. If the door is stained, use a palm sander with fine-grit sandpaper (220 or 240) and lightly sand the door. Brush off the dust with a bench brush and wipe the door with a tack cloth. If you’re staining, go to step 6.
Scrape off the paint after leaving the stripping compound on for the appropriate length of time (follow the directions on the label) using a scraper tool. Repeat steps 2 and 3 until the wood is exposed.
Neutralize the paint stripper as directed on the paint stripper neutralizer instructions.
Sand the door to remove the last bits of paint and smooth out any rough spots. Brush off the dust with a bench brush and wipe the door with a tack cloth.
Inspect the wood for areas of damage. Remove any rotted areas or old wood filler with a chisel or scraper and apply a wood stabilizer, following the instructions on the label.
Condition the wood with a wood conditioner (follow the directions on the label) if you’re staining. If you’re painting, apply a coat of primer to the door. Let dry. If the primer doesn’t cover well, lightly sand the door with a fine-grit sand paper (220 or 240-grit), remove the dust and apply a second coat. Let dry.
Lightly sand the conditioned or primed wood with fine-grit sandpaper and remove all the dust.
Apply two coats of enamel or stain, sanding lightly, removing the dust and drying completely in between coats.
Apply at least two coats of high-quality marine or spar varnish if you’re staining an outside door. Replace the door hardware and remount your door.
Tips & Warnings
- Restoring doors is a job best done outside, but if you’re inside make sure you have proper ventilation.
- Keep the palm sander moving on the wood at all times to avoid damage to one spot.
- Use high-quality acrylic enamel or stain that’s appropriate for your door, i.e., UV protection, weatherproof, easy to clean, etc.
- Use good quality paintbrushes.
- Always follow the grain of the wood when sanding or applying conditioner, primer, enamel or stain.
- Always wear safety glasses and a mask when sanding or using chemical stripping compounds.
- Work in a well-ventilated area.
- Dispose of cloths and leftover materials following instructions on the label and according to local waste-management ordinances.
- Paint, stain and stripping compounds are highly flammable.
- Clean your tools following instructions on material labels.
- Photo Credit doors 3 image by Pix by Marti from Fotolia.com door 4 image by Dusan Radivojevic from Fotolia.com creeky crackled door image by Lauren Ingro from Fotolia.com two doors image by nw7.eu from Fotolia.com lion's head door knocker extra large and old image by Stephen Orsillo from Fotolia.com
How to Restain a Wood Door
Wood is a fantastic surface to work with. It can be worked into a high glossy shine or it can have a...
How to Strip & Stain an Exterior Wood Door
The front door is the first thing people see when they come to your house. It's also highly visible from the street...
How to Restore Old Doors
Refinishing an existing door in your home or repurposing a salvaged door for use as a bar, table or decorative design element...
How to Restore Exterior Wood Doors
If your front door makes the house's exterior look as dull and gray as its weathered wood but is an odd size,...
How to Restore Old Wooden Doors
Old wooden doors can provide a rich natural beauty and unique design to complement the decor of your home. These older doors...
How to Restore a Glass Shower Door
Restoring a neglected glass shower door takes a bit of effort, but it is usually possible. The first challenge is removing soap...
How to Refinish Sun-Damaged Wood Doors
Your doors are may provide visitors with their first impression of your home. Wooden doors can enhance the appearance of your home,...