How to Hang Sheers

Sheer fabric makes for elegant curtains.

Sheer curtains are an elegant option to place in any window, either by themselves or paired with a heavier drape. Sheers allow soft, natural light to come into the room even when closed, yet offer a sense of privacy. Hanging sheer curtains is similar to hanging any other type of window treatment, so they are easy to install in a short period of time. Sheers also come in a variety of colors, allowing to you pair them with different-colored draperies or room décor.

Things You'll Need

• 2 sheer panels Hanging rod w/ hardware Pencil Measuring tape Cordless drill

Instructions

1. Remove any drapes that are hanging in the window, and remove the rod to use a new one. Sheer or lightweight curtains should be paired with thinner, delicate-looking curtain rods. Using thicker curtain rods would look overwhelming with the sheers.

2. Choose the length of sheers that would best fit the room. For formal living spaces, curtains should skim the floor. Casual rooms and kitchens look best with curtains that skim the window sill.

3. Measure the window space for the new hanging rod. The width of the pole should be 1 foot longer than the total window space. This will allow the rod to hang 6 inches past the window on both sides for an elegant and proportional style to the window.

4. Measure 6 inches up from the window and mark with a pencil on either side of the window. This is where the hardware will be installed to hang the curtain rod. Use a tape measure to ensure even measurements on both sides.

5. Install the brackets over the pencil markings. Attach the sheers to the rods by inserting the openings of both curtains onto the rod and sliding the entire panels so they are completely on the rod.

6. Fasten the rod to the brackets and arrange the sheers as desired.

References

• Interior Design It Yourself: Buying and Hanging Window Treatments An Easy Guide
• Dummies.com: Using Curtains and Draperies in Your Home Decor