How to Apply Hardiboard to Concrete Floors

Save

When you’re installing ceramic tiles, you need a firm, flat, solid surface below it. Cement board is usually laid over wood subfloors to provide that base. It looks and cuts like drywall, but gives a cement-like foundation for the tile. You can install tile directly over a concrete floor, but if the concrete is cracked, uneven or otherwise unsuitable for tiling, you can mortar cement board over the concrete as well. HardiBacker Boards are a top brand.

Things You'll Need

  • 1/2-inch cement board Pencil Thinset mortar Mortar trowel Jigsaw Drywall tape (adhesive mesh) Drywall knife
  • Set a sheet of Hardiboard on one corner of the floor. Trace around the perimeter of the board with a pencil. Take up the board.

  • Spread a layer of thinset mortar onto the marked-out area with a mortar trowel, covering the area completely. Set the Hardiboard back in place, pressing it down fully into the mortar. Walk around the board to ensure that it’s fully secured.

  • Repeat the process for the next board, setting it at the end of the first board, tracing around it, spreading down mortar, and setting the board in place.

  • Lay the boards end to end along the wall. Cut the final board in the course with your jigsaw so it fits against the side wall. Start the second course alongside the first but at the opposite end as you started before, so the seams are staggered.

  • Cover the whole floor with Hardiboard, course by course. Let it set for a day.

  • Press drywall tape on the seams between the boards, covering all of them. Spread thinset mortar over the tape lines, using a drywall knife. Get the mortar smooth and even. Let it set overnight.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!