How to Remove a Key Broken Off in a Dead Bolt Lock

Save

Keys are not made from the strongest materials. They become weak over time and develop hairline fractures that you often do not see. Eventually a hairline fracture becomes weak enough to break the key off in your dead bolt lock. You can remove a key broken off in your dead bolt lock without the cost of a locksmith. There are key extractor tools available, however they are difficult to find unless you order one. Alternatively use an old jig saw blade. Use the smallest jig saw blade you have to extract the broken off key.

Things You'll Need

  • Key extractor tool Jig saw blade Duct tape Spray lubricant
  • Wrap one end of the jig saw blade with duct tape, if you are not using an extractor tool. Wrap the end that allows the teeth of the blade to point toward you when inserting the blade into the lock. Wrapping the end of the blade helps to protect your hands from cuts.

  • Spray the key hole lightly with spray lubricant. This helps the key to come out with less difficulty. Concentrate the spray in the area where the teeth of your key points in the lock.

  • Insert the key extractor tool or the jig saw blade into the key cylinder. The tool or the blade are thin enough to insert above the teeth of the key. The tool or jig saw blade move the tumblers off the key teeth as you insert the tool into the cylinder.

  • Feel around for a jagged cut on the key with the tool or jig saw blade. You'll know when you have a grip on the key.

  • Pull the tool or jig saw blade out of the key cylinder quickly. Watch for the broken piece of key as you remove the tool or jig saw blade.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!