How to Attach a Snorkel to a Mask
Snorkels and masks are used by both snorkelers and scuba divers to explore the underwater world. For snorkelers, the pair comprise the bulk of their equipment. For divers, the snorkel is useful for breathing on the surface, especially in rough conditions. In both cases, proper attachment of the snorkel is essential so that it does not interfere with the mask or any other equipment, and so it stays on the mask during the snorkeling or diving trip.
Other People Are Reading
Instructions
-
-
1
Put the mask on and adjust the straps for a good fit. The mask should be firmly in place, but comfortable. If you think the mask will leave an impression on your face, it is too tight. Smooth out the strap so it is straight and not twisted up or entangled in your hair.
-
2
Put the snorkel's mouthpiece in your mouth and hold the snorkel up so the tube runs alongside your temple. Use your sense of touch to guide you as you slide the clip up or down the tube and into a position where it is over the strap. If you are a scuba diver, the tube must be on the left side of your head. Snorkelers may use the left or right side.
-
-
3
Remove the mask, keeping a finger on the area where you intend to clip on the snorkel. Take care that the clip on the snorkel tube does not move. Carefully clip the snorkel onto the strap in the noted part of the strap.
-
4
Put the mask on and put the snorkel's mouthpiece in your mouth to check the fit and see if the clip will hold in place. If it does not pop off and the fit is good, the snorkel is properly attached.
-
1
Tips & Warnings
Divers always put the snorkel on the left side to prevent it from becoming entangled in their regulator hoses.
References
- Photo Credit snorkel image by Ahmed Zahir from Fotolia.com
