How to Make a Plastic Bag Holder Out of Fabric

Save

Reusing plastic grocery bags helps out the environment, but finding a convenient way to store all of them can be difficult. One solution is to sew your own fabric grocery bag holder. A grocery bag holder is basically a long, fabric tube with a handle to hang it from and elastic bands on either end keeping the bags from falling out. Lots of plastic bags can go in the larger opening at the top, but only one at a time will come out of the smaller opening at the bottom. You only need minimal sewing experience to sew this simple bag.

Things You'll Need

  • 20-inch by 25-inch piece of fabric
  • 11-inch piece of elastic (1/4-inch wide)
  • 6 1/2-inch piece of elastic (1/4-inch wide)
  • 2 safety pins
  • 14-inch ribbon
  • Sewing machine
  • Center the fabric, face down, with the shorter end at the top and the longer ends at the sides. Lay the 11-inch piece of elastic down, one end of it on the left hand edge of the fabric and the length of it running 3/4-inch down from the top edge of the fabric. The elastic should run halfway across the width of the fabric.

  • Pin a safety pin to the end of the elastic laying in the middle of the piece of fabric. Fold 3/4-inch fabric from the top edge down over the elastic. The fabric should cover the elastic with 1/2-inch seam allowance to spare.

  • Sew the edge of the folded-over fabric onto the free end of the elastic.

  • Sew the entire length of the folded over fabric closed, without sewing through the rest of the elastic, leaving 1/2-inch seam allowance.

  • Repeat steps 1-4 at the bottom end of the fabric using the 6 1/2 inch piece of elastic.

  • Use the safety pins to thread the pieces of elastic through and out the ends on the right hand side of the fabric.

  • Fold the length of fabric in half like a book and sew its entire vertical length closed, sewing together the ends of the elastic. Make sure the fabric is still inside out when you sew it and be sure to remove the safety pins after you've sewn the entire length of what is now a fabric tube with elastic openings at either end.

  • Giving yourself 1/4-inch seam allowance, sew the bottom edge of one end of the ribbon halfway around and 1 inch down from the top edge of the inside out fabric tube. Do the same with the other end of the ribbon, spacing it halfway around from the first ribbon end.

  • Turn the tube right side out.

Tips & Warnings

  • Use the ribbon to hang the bag holder on a door hook or handle.
  • You can use a cotton hand towel instead of a length of fabric to make this bag holder.

Related Searches

References

  • "Martha Stewart's Encyclopedia of Sewing and Fabric Crafts"; Martha Stewart Living Magazine, 2010
  • Photo Credit bachelor shopping image by Leticia Wilson from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • Plastic Bag Holder Patterns

    An environmentally responsible business needs to promote reduction of materials used and recycling. A major problem is the plastic shopping bag. The...

  • How to Make a Plastic Bag Dispenser

    Tired of that heap of plastic grocery and shopping bags stuffed under your sink or shoved into a drawer? Those bags come...

  • How to Make a Tea Bag Holder

    A handmade tea bag holder can be a whimsical and creative way to give the gift of tea. With simple patterned card...

  • How to Make a Trash Bag Holder

    Soon after their debut toting groceries from the store, the plastic grocery bag often gets a second life as a trash can...

  • How to Store Shoes in a Plastic Bag

    Opening countless boxes to find your favorite pair of shoes takes time. You can save yourself time and effort if you store...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!