How to Care for an Inflatable Hot Tub

Save

Inflatable hot tubs offer several advantages over traditional hard-bodied hot tubs. The most obvious difference is that they are much lower in cost and are easily moved if you desire a change in location. In addition, inflatable hot tubs require less overall maintenance. Proper maintenance ensures that the inflatable hot tub does not fail prematurely.

Things You'll Need

  • Water test kit
  • Bucket
  • Warm water
  • Liquid dish soap
  • Non-abrasive sponge
  • Garden hose
  • Choose a location for the inflatable hot tub that on even ground so that the water pressure is evenly distributed. Make sure there are no rocks, sticks or other sharp objects on the ground which can puncture the inflatable hot tub.

  • Purchase a pH water test kit at a home improvement store. Insert the amount of water into the tube up to the fill line and add the pH solution form the packaging. Wait until the color develops and compare the color against the chart on the kit to determine the pH level of the water. The pH level should be between 7.4 and 7.6. Test the water pH once per week.

  • Remove the top cover from the pump by unscrewing it. Lift out the filter cartridge. Run the filter cartridge under running water to rinse away all dirt and debris that may be clogging it. You should clean the filter cartridge at least once per week.

  • Drain out the water in the inflatable hot tub once very three to four weeks by screwing the drain hose into the drain outlet at the lower outside of the inflatable hot tub. Place the other end of the drain hose in a location where you want the water to drain to. Return to the first connection and twist the top of the valve counterclockwise to start the flow of water.

  • Fill a bucket 3/4 full of warm water and add 1 to 2 tbsp. of liquid dish soap. Clean the inside of the inflatable hot tub at least once every three to four weeks with the soap solution and a non-abrasive sponge. Rinse the hot tub thoroughly with a garden hose after cleaning to remove all of the soap residue.

  • Allow the inflatable hot tub to dry completely before folding it up for storage. If the hot tub contains any water droplets, they will develop mold and mildew.

  • Store the inflatable hot tub out of direct sunlight and in a location that does not reach high temperatures. High temperatures will cause the plastic to degrade prematurely.

Tips & Warnings

  • The filter cartridge should be replaced every two months.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

  • Alternative Spa Covers

    Spa covers keep leaves and other debris out of hot tubs. Besides providing a measure of insulation, these covers also can prevent...

  • What Is the Temperature of a Hot Tub?

    Using a hot tub is a popular way to relax. Hot tubs have become increasingly common in backyards across America. Few people...

  • Care & Maintenance of Hot Tubs

    Hot tubs need weekly care and maintenance to sustain safe water conditions and equipment performance. Protecting the shell and heater are the...

  • How to Maintain a Hot Tub

    To maintain a hot tub is easy enough to do. It is important to maintain water quality and water levels in a...

  • How to Move a Hot Tub

    Moving a hot tub can be dangerous if you don't have the right equipment or know how to move it properly. As...

  • How to Clean a Spa Bathtub

    Cleaning spa bathtubs and plumbing is important to eliminate growth of mold and mildew, which can lead to infections. As every spa...

  • How to Drain Cal Spas

    Cal Spas began manufacturing portable spas for recreational use in 1979. Since that time, their product line has expanded considerably. In 2010,...

  • How to Drain an In-Ground Hot Tub

    In-ground hot tubs can be very relaxing and enjoyable, but they require regular maintenance to keep them looking their best and the...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!