DIY Towel Warmer

Save

When you get out of the shower or the pool, you may want to enjoy the luxury of drying off with a warm towel. Before you part with your money to buy a commercial towel warmer, consider making one at home with inexpensive materials. This towel warmer may not look as glamorous, but it will still warm your towel and keep your wallet a little heavier.

Things You'll Need

  • Styrofoam cooler
  • Knife
  • Electric heating pad
  • Aluminum foil
  • Duct tape
  • Cut a hole in the cooler large enough for the heating pad's electric cord and plug to pass through. Cut another hole above the first hole, making it the size of the heating pad's control panel.

  • Line the bottom of the cooler with aluminum foil. Place the heating pad in the bottom of the cooler and tape the edges of the aluminum foil to the sides of the cooler.

  • Pull the heating pad's cord through the lower hole in the cooler and insert the control panel into the other hole. Cover the inside of both holes with aluminum foil.

  • Place a towel on the heating pad and close the cooler's lid. Plug the heating pad's cord in and select your desired setting on the control panel.

Related Searches

References

  • Photo Credit striped towel 1 image by dana nicolescu from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Make a Room Warmer

    If your furnace is functioning well but you're still cold, try some simple tips and tricks for warming up the rooms where...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!