How to Install a Washing Machine in a Trailer
When installing a new washing machine into a trailer or any home, there are several steps beyond simply hooking up hoses. You don't need an electrician or a handyman, but a little bit of preparation can go a long way. Before installing your new washing machine, it's often necessary to first remove the old one. Does this Spark an idea?
Instructions
-
-
1
Unplug your old washing machine from the electrical outlet in your trailer. Turn the water supply spigots to the right to turn them off.
-
2
Disconnect the water supply hoses from your old washer. You may need a pair of channel locks or a pair of pliers to do this. Turn them to the left to loosen and detach them.
-
-
3
Rock the unit back, place a blanket under the unit and slide the old washing machine out of the trailer. The blanket or carpet will help so you don't scratch your floors.
-
4
Sweep up any dirt or debris on the floor where the washer was. Fill a bucket with about 1 gallon of water and a little bit of cleaning solution. Mop the floor where the old washer was and allow it to dry.
-
5
Slide your new washing machine into place atop a blanket or carpet. Connect the water supply hoses to the unit. Connect the "Hot" water supply to the "Hot" connection on the washer. Connect the "Cold" water supply to the "Cold" connection on the washer. These will be labeled on both the supply spigots and the washer connections.
-
6
Plug your washer into the electrical outlet in your wall. Turn the water supply valves on by turning them to the left.
-
1
References
- Photo Credit laundry image by timur1970 from Fotolia.com
