How to Paint Cheap Furniture

Save
Upgrade cheap furniture with a coat of paint.
Upgrade cheap furniture with a coat of paint. (Image: modern furniture image by terex from Fotolia.com)

Cheap furniture can look, well, cheap. Often, inexpensive furniture is made from veneer and low-cost building materials. Adding paint to cheap furniture will help it to look classy without spending a lot of money on new furniture. Although painting cheap furniture is similar to painting any other type of furniture, there are a few extra things that you need to do before you can paint cheap furniture.

Things You'll Need

  • Fine-grit sandpaper
  • Sanding block
  • Damp cloth
  • Oil-based primer
  • Paint trays
  • Paint roller
  • Paintbrush
  • Latex paint

Check the furniture to make sure it is sturdy, and repair as needed. Cheap furniture is not usually built as well as more expensive furniture. In addition, older furniture purchased cheaply may also be a little unsteady and in need of repairs. Take the time to sure up any areas that might need extra help.

Check the furniture to determine if you are dealing with a veneered pieced of furniture or a solid wood piece. Open the drawers of the furniture, or look at the back of the piece. Veneered furniture will have a thin layer of veneer over a plywood or MDF board base.

Lightly sand the furniture with fine-grit sandpaper. Sand solid wood pieces until the finish is mostly gone from the cheap furniture. Some types of cheap veneer furniture will have a plastic-like veneer. If this sounds like your furniture, just sand the veneer until the glossy finish is gone. Wipe the entire piece with a damp cloth to remove the dust.

Pour a small amount of oil-based primer into a paint tray. Use a paint roller to roll the primer onto the sanded piece of furniture. One light coat of primer should be enough to help the paint to stick and prevent stains from showing through the paint. Use a paintbrush to prime the hard to reach spaces of the furniture. Wait several hours or until the primer is dry before painting.

Pour the latex paint into a paint tray. Roll the paint roller into the paint, and begin painting the piece of furniture. Roll the paint onto the furniture in a thin layer. Wait for the paint to dry, and apply a second coat of latex paint. Once the paint is dry, wait 48 hours before using the piece of furniture.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

4 Credit Myths That Are Absolutely False

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!