How to Troubleshoot a Range Hood Fan

Save

Typically a range hood fan is a dependable appliance that’s always there when you need it to take smoke and smells out of your kitchen. Unfortunately, a hood fan occasionally develops problems either in its electrical components or its motor that a do-it-yourselfer can troubleshoot. Because the vent hood fan is such a simple component, you may even be able to make the repairs yourself if you have mechanical and electrical skills. Some manufacturers even make it a simple matter of disconnecting the old range hood fan and plugging in a new one.

Things You'll Need

  • Ohm meter
  • Check the circuit breaker box to make sure there’s power to the range hood fan. Flip the circuit back on if it’s off. If you have a fuse box, make sure the fuse is intact and replace it if it’s not. Typically range hoods don’t have plugs, but if yours does, make sure the plug is firmly in the outlet.

  • Test the electrical current to the fan switch with an ohm meter. Look for zero resistance when the switch is on. If the switch only turns the fan on to one speed, the switch may still be the problem because it’s only getting power to part of the switch. Turn off the electrical current to the range hood and replace the switch.

  • Check that the fan’s motor is working with the ohm meter. Any reading other than zero indicates the motor is the problem. You can replace the motor without removing the hood in most instances.

  • Look for the fan’s blower connector. Not all models have one. If your vent hood does, make sure the connections are firmly in place.

  • Clean the filters if the fan doesn’t move the air as well as it usually does. Use warm soapy water to cut through the grease to allow air to circulate through the vent and to the fan again.

  • Feel the fan’s blades on the shaft carefully. Too much movement on the shaft may cause extra noise from vibration as the fan operates. Replace the fan if there is too much wear.

  • Determine if your vent actually takes the air outside or just re-circulates it in the room. You can usually see ductwork for a fan that has a vent. Look in the cabinet above the vent hood. If the fan is on and you feel air coming out of the front of the vents, your range hood fan isn’t set up to vent the air outside. It’s possible to add ventilation, but you have to add the ductwork that goes with it.

Tips & Warnings

  • Remember to turn the electricity off if you replace the switch or motor of the fan in the vent hood.

Related Searches

References

  • Photo Credit kitchen image by Pavel Losevsky from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!