How to Use a Craftsman Wet-Dry Vacuum

The Craftsman wet-dry vacuum is capable of three different functions. It can vacuum both wet and dry materials, and it also comes with a detachable blower attachment that can be used to clear dust and debris inside or outside. Wet and dry materials should never be vacuumed at the same time, and the vacuum filter should always be removed before vacuuming wet materials. Always follow all safety guidelines when using the Craftsman vacuum.

Things You'll Need

• Screwdriver
• Safety goggles

Instructions

Dry Use

1. Attach the desired attachment (brush, suction wand or car nozzle) to the extension hose attached to the drum. Make sure the bond is tight between the different pieces.

2. Plug the vacuum into the wall and turn it on.

3. Slide the extension wand slowly over the material that you want to vacuum. Vacuum the area several times to remove all traces of material.

Wet Use

1. Open the top of the vacuum by releasing the latches holding the drum lid over the canister. Remove the lid. The filter cage is located in the center of the vacuum. Slide the filter cage out of the vacuum. Use a screwdriver to unscrew the filter from the filter cage. Remove the filter from the filter cage and then replace the filter cage and drum lid.

2. Attach the nozzle attachment to the extension hose connected to the vacuum. Plug the vacuum in and turn it on.

3. Drag the wet nozzle attachment over the surface of the liquid on the surface. The vacuum will suck up the liquid using a combination of vacuum power and a squeegee.

Blower

1. Detach the blower attachment from the top of the vacuum by pressing the release latch located under the handle of the blower.

2. Insert the blowing wand into the blower attachment. Place the adapter over the end of the blowing wand. Attach the blower nozzle to the end of the adapter.

3. Plug the blower cord into the wall. Turn the blower on.

4. Blow debris, leaves, dirt and even water by pointing the blower about 12 to 18 inches away from the material. Blow into the street, or into a pile that you can gather later.

Tips & Warnings

• Do not use the vacuum without the filter unless vacuuming liquids.

• Do not vacuum ash or soot. The particles are too fine for the filter to catch.

• Do not use the vacuum on wet surfaces.

• Do not use the vacuum if the cord is torn or damaged in any way.

References

• Managemylife.com: Craftsman 16 Gallon Wet-Dry Vacuum with Detachable Blower