How to Make a Cork Trivet Using a Picture Frame

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Cardboard or thin wood panel

  • Small hand saw

  • Heat resistant glue or wood glue

  • 20 to 50 bottle corks

Make good use out of your cork collection with a rustic trivet.

Instead of buying an expensive cork trivet, you can make your own from wine corks and any picture frame you want. Just save up enough wine corks to fill the picture frame. Save the wine cork whenever you have a bottle of wine, or ask your friends to donate their corks. To conserve corks, you can even cut them in half and glue down each half to the frame backing.

Advertisement

Step 1

Remove the glass and any wire or brackets for hanging from the picture frame.

Video of the Day

Step 2

Place the picture frame on the cardboard or wood and trace an outline for cutting, if the piece isn't already cut to size. Cut the cardboard with a scissors or wood with the hand saw to fit over the entire back of the picture frame. Squeeze a thick line of heat resistant glue around the backing about an inch away from the edge and glue it to the back of the frame. Use wood glue for a wood backing.

Step 3

Place all the corks on the frame and experiment with different arrangements of the corks on the frame, looking for interesting designs on the corks or a harmonious pattern. Cut the tips off some corks and place them upright for a different look. Lie the corks in alternating directions if they don't fit tight together.

Advertisement

Step 4

Place a line of glue along the back of the cork and press the cork into position on the frame where you want it. Repeat with each cork. Let the glue dry according to the manufacturer's instructions.

Tip

Find a frame deep enough to hold the whole corks if you don't want them to stick out. Cut a thin slice off each cork with a serrated blade, box knife or whatever cuts the easiest to allow the corks to lie flat on the frame for easier gluing. Cut the corks in half so they don't stick out as much. Hold the corks with a vice or tongs for an even safer grip when cutting. Look at garage sales or thrift stores for cheap frames.

Warning

Use caution when using any cutting tools and avoid cutting near your fingers.

Advertisement

Video of the Day

references

Report an Issue

screenshot of the current page

Screenshot loading...