How to Make a Wooden Bench Seat for a Dining Table

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Large wood plank

  • 4-by-4 stud

  • Measuring tape

  • Pencil

  • Saw

  • Drill

  • Screws

  • Screw driver

  • Wood putty

  • Wood stain

  • Towel

Benches provide easy access to the table.

Adding a bench to a dining room table gives you more sitting space without making the room seem cluttered with more large, clumsy chairs. Benches may be stored easily under the table or they could be used as seating under a window when not being used for dinners. Finding wood that matches your existing dining room set makes the bench look as if it were purchased with the rest of the pieces.

Advertisement

Step 1

Buy wood that matches your table if at all possible. Look at the table design and decide if you will design the bench to match. A table made of planks assembled together requires more work but follows the same principals as a one-piece table top.

Video of the Day

Step 2

Measure the length of the table. You may want the bench to match this length or be slightly smaller. For example, a table 60-inches long should have a bench between 55- and 60-inches long.

Advertisement

Step 3

Measure and cut the bench according to your desired length to match the table. The width of the bench should be 12 inches, which gives enough space for people to sit comfortably on the bench.

Step 4

Measure and cut four bench legs from the 4-by-4 posts. There should be 18-inches from the floor to the top of the bench. If your plank is one-inch thick, this means your posts legs need to be 17-inches long each.

Advertisement

Step 5

Measure and mark post holds in the bench top. Put two holes for each post. The first hole is one inch from each corner with a second drill hole two inches from each corner.

Step 6

Match drill holes in the leg posts, setting the legs so they are flush with the edges.

Advertisement

Step 7

Secure the legs in place with four-inch screws. Place wood putty in the screw holes, making the surface smooth by running your finger over the hole.

Step 8

Apply a stain that matches the rest of your dining room furniture. Wipe the stain on with a clean towel. The more coats of stain, the darker the color becomes.

Advertisement

Video of the Day

references

Report an Issue

screenshot of the current page

Screenshot loading...