How to Take Apart a Kenmore 70 Series Washing Machine
Taking apart the Kenmore 70 Series washing machine is a job that can be done in about 30 minutes. The 70 Series is a standard model in the Kenmore line of appliances, and can be taken apart by removing a few screws and parts. Occasionally, you may need to access the interior of the washer to perform maintenance or replace worn out parts. You can take the washer apart yourself and save the time and expense of having someone else do it for you. Does this Spark an idea?
Instructions
-
-
1
Unplug the electrical cord of the Kenmore 70 Series washing machine before attempting to take it apart.
-
2
Remove the end caps from the control console by pressing in on the center of the caps with your thumbs and pulling out, away from the console to detach the caps.
-
-
3
Locate the screws on the front of the control console and unfasten them with a screwdriver, setting the screws in a safe place.
-
4
Flip the control console back so it is resting on the rear hinges, and unplug the lid switch from the top of the washer cabinet near the back.
-
5
With a screwdriver, pry the metal clips off the top of the washer near the back, and lift the top lid of the washer off the cabinet base, setting it out of the way.
-
1
Tips & Warnings
Always unplug the Kenmore 70 Series washing machine from the power supply before attempting to take the washer apart.
