How to Remove Rust From Ice Skates

Save

If you don't skate professionally, you might not know how to take care of your ice skates. Rust can develop on the blade if you don't keep the blade nice and dry after every use, and it will eat through the blade and ruin skates. Healthy blades can last years with proper maintenance.

Things You'll Need

  • Lemon
  • Steel wool
  • Cloth
  • Clean off the blade. Using an old cloth, rub on the sides of the blade, removing any loose particles. Take steel wool and rub at the rust-covered areas, removing as much of the rust as you can without applying too much pressure. If there is little rust present, you can just get the blades sharpened to remove it.

  • Roll a lemon either between your hands or on a counter, but apply pressure so you're squeezing the lemon. Cut the lemon in half and squeeze one half onto a cloth. If half of the lemon doesn't cover the whole cloth, then you can use the second half.

  • Use the cloth you soaked in lemon juice and rub down the blade, making sure you're covering all the rust in lemon. Let the lemon juice sit on the blades for a minute then wipe it off with a clean cloth.

  • Use steel wool to wipe at any rust left after you wipe the lemon juice off. Don't apply too much pressure with the steel wool or you may scrape away too much of the blade.

Tips & Warnings

  • Watch out when drying or cleaning the blades. They may be very sharp.

Related Searches

  • Photo Credit ice skate image by Gina Smith from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Clean a Rusty Skillet

    Don't toss that pan - a little elbow grease (and some real grease) is all it takes to bring a rusty cast-iron...

  • How to Clean Rust From a Saw Blade

    Rust can build up on any exposed metal surface. This is especially true for saw blades. Whether that blade belongs in an...

  • How to Clean Hockey Skates

    Hockey skates are notorious for their stink, which is the result of bacteria that grow in warm, wet environments. The best way...

  • How to Get Rust Off of a Saw

    Get rust off of a saw by spraying the surface with WD40, brushing off loose rust with a toothbrush and lightly sanding...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!