How to Replace the Cartridge on a GE SmartWater

Water filters remove many impurities found in tap water.

GE refrigerators that are equipped with a water dispenser system use SmartWater filter cartridges to keep the water system clean and free from impurities. GE recommends replacing the SmartWater filter cartridge about once every six months. An old filter cartridge will become less effective at keeping the water system clean after a long period of time. In most models, the filter cartridge is located in the upper right-hand corner of the top refrigerator compartment.

Things You'll Need

• New SmartWater filter cartridge

Instructions

1. Twist the old cartridge to the left until it comes loose. Remove the old filter cartridge.

2. Fill the replacement cartridge with tap water.

3. Position the new cartridge into the filter cartridge holder. Twist to the right until the cartridge no longer turns.

4. Turn on the water dispenser. Allow it to run for three minutes to clear out the water system.

5. Press the "Reset Water Filter" button on the dispenser and hold for three seconds. The light will turn off or turn green, depending on the GE refrigerator model.

Tips & Warnings

• Water may spurt from the dispenser when a brand new filter is installed.

References

• GE Appliances: Knowledge Base