2002 Oldsmobile Alero Keyless Entry Programming Instructions

Oldsmobile vehicles are equipped with keyless entry capabilities

Oldsmobile vehicles, like most vehicles manufactured since the 1990s, are equipped with keyless entry capabilities. These systems can be added by the dealership or aftermarket to your 2002 Alero. You can program up to five keyless entry remotes to the system to control your vehicle's features from as far as a couple hundred feet away. With a keyless entry system you can have access to your 2002 Alero's remote starter, trunk, door locks and panic alarm, and the programming can be done in just minutes from your car.

Things You'll Need

• Jumper cables

Instructions

1. Insert your key into the car's ignition and remove the driver's side dashboard to locate the data port.

2. Connect pins four and eight with a set of jumper cables in the data port. The four and eight pins are located on the top of the port, four and eight spots from the left.

3. Wait for the locks to cycle after connecting the jumper cables and close the Alero's door.

4. Turn your key to the "On" position and wait for the locks to cycle again.

5. Press and hold the unlock and lock buttons on your remote until the car responds by cycling the locks again. Release the buttons.

6. Repeat step five with any additional remotes and remove the jumper cable from the data port to end the programming sequence.

References

• Program Your Remote: Oldsmobile Keyless Entry