Snow blower tires are durable, allowing owners to plow snow on nearly any terrain. That does prevent the tire from accumulating wear and tear, however. Eventually the tire will wear down, requiring it to be replaced as a can of tire sealant will not work on an old, dilapidated tire. When replacing a tire, be sure that the replacement is a comparable tire that is listed in the owner's manual. As always, wear safety goggles and gloves during tire replacement to avoid injury.
Things You'll Need
- Plastic wrap
- 5/8-inch wrench
- Flat-head screwdriver
- New tire
Seal the gas cap with a piece of plastic wrap. This will prevent the cap from spilling gasoline onto the road or driveway.
Lift the snow blower onto the auger blades. You might need another person to help lift the mower. The blower will now be standing upright on its front.
Pull the black, rubber cap off the flat tire's center. Under it will be a 5/8-inch bolt.
Unscrew the bolt with the 5/8-inch wrench. Slide the bolt and the washer underneath it off the blower. Slide the tire off the axle gently.
Position the flat-head screwdriver between the tire and the metal rim and pry the tire off.
Place a new tire around the rim. Make sure it is fits tightly around the rim before going forward.
Place the tire on the axle. Place the washer over the exposed axle and tighten the bolt over it. Place the rubber cap over the bolt.
Tips & Warnings
- MTD carries parts on their website, but many shops do too.
- Do not leave the motor running while replacing the tire.
- Photo Credit cleaning driveway image by samantha grandy from Fotolia.com
How to Repair a Flat Snowblower Tire
A flat snowblower tire can really set you back if it just snowed and you can't remove any of the snow. Snowblowers,...
How to Remove the Rear Tire & Rim From an MTD Riding Mower
When you are in the middle of the mowing season, the last thing you need is a flat tire to slow you...
How to Change a Tube in a Snow Blower Tire
A snow blower tire can become flat for a number of reasons and simply stop holding air. A bent rim may be...
How to Tune an MTD Snow Thrower Carburetor
Tuning the carburetor on an MTD snow thrower that runs rough is an easy task to accomplish, and will allow the machine...
How to Replace an Auger in an MTD Snow Blower
MTD produces a line of snow blowers, also called snow throwers. Each contains an auger. This device is made of large steel,...
Specifications for 1995 8HP MTD Snowblower Engines
MTD has produced snowblowers and other yard-work machinery for decades. The 1995 MTD Yardman snowblower featured a Tecumseh 8 HP Snow King...
How to Change a Flat Tire
Replacing a flat tire requires only a few essentials. Know this easy (and all too common) automotive task, and you'll be rolling...