How to Glue Marble to Wood

Save

If you've always dreamed of sleek, marble countertops in your kitchen or bath, it's time to stop procrastinating and start creating. Woodworking is an enjoyable task that often involves other materials. A set of custom cabinets may have a granite countertop installed. Or a custom bathroom vanity could boast a gorgeous marble top. The do-it-yourself handyman can save big bucks by attaching marble and granite to wood using just a few tricks of the trade.

Things You'll Need

  • 3/4-inch by 2-inch wood for bracing
  • Wood glue
  • Pocket screws
  • Pocket screw jig
  • Miter saw
  • Tape measure
  • Putty knife
  • Brush
  • Shims
  • Silicon adhesive caulk
  • Caulk gun
  • Check the wood to be sure it can hold the weight of the marble. If you are putting marble on a cabinet or a vanity, you may need to add supports. Cut 3/4-inch by 2-inch strips of wood that will fit the inner walls of the cabinet or vanity. Cut them to length on a miter saw and then glue and pocket screw them to the cabinet. A pocket screw jig uses a drill to bore a slanted hole in wood so you can attach it to another piece of wood without the head of the screw sticking up above the surface. Let the glue dry before proceeding to the next step.

  • Clean the surfaces of the wood and the marble. Remove any loose debris or sawdust. A putty knife and a dust brush work well to remove old glue and debris.

  • Set the marble on the wood and dry fit it together. Check to see if it sits level or if you need to shim the marble or add additional wood supports. Make sure that the marble fits correctly before proceeding to the next step. You do not want it to wobble or tip.

  • Apply a silicon adhesive to the wood in spots. It does not take a lot of silicon to hold the marble in place. The silicon will cushion and help to level the marble. Use a caulk gun to apply the silicon to the wood.

  • Wait for the silicon to dry according to the label's directions before moving or using the marble. The marble is heavy and can shift if bumped before the silicon dries.

Tips & Warnings

  • Understand the care and upkeep that comes with marble, especially marble countertops. Caring for them according to the manufacturer's directions increases their longevity.
  • Use caution and plenty of manpower when handling marble. It's fragile and heavy and can easily smash fingers if you aren't careful.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Glue Cultured Marble

    Cultured marble is a manufactured stone that is cast into shape from a liquid state, like concrete. Cultured marble offers a palette...

  • How to Remove Cured Gorilla Glue From Polished Marble

    Gorilla Glue is a powerful adhesive that works on metal, stone, wood, ceramics, foam, glass and other materials. It is entirely waterproof...

  • How to Attach a Marble Top to a Wood Vanity

    The hardest part about installing the top is making sure that no tools scratch or crack the surface. It is important to...

  • How to Glue Stone to Wood

    Working with materials so different from each other such as stone and wood causes a bit of a conundrum when you're trying...

  • How to Glue Fabric to Wood

    Fabric-to-wood adhesion is commonly used in furniture-making. Typically, the most effective and best-looking fabric-to-wood method is through the application of aerosol trim...

  • How to Attach a Stone Table Top to a Base

    Stone is a porous material used to manufacture countertops, flooring and tabletops. The material is extremely heavy and offers an unmatched level...

  • How to Glue Marble Slabs Together

    Marble is a strong material, but it can break. Too much pressure can break a piece of marble, and a heavy object...

  • How to Glue to Concrete

    Concrete is a porous material, which makes it difficult to glue some materials to the surface. Smooth materials, such as marble, glass...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!