How to Build a Sign Post

Save

Whether you are having a garage sale or throwing an open house, a good way to attract people is by building a sign post. Making sign posts does not have to be a difficult or expensive task. In fact, use scrap wood and planks in your own home, or purchase cheap lumber from a home improvement store. Many of these stores will cut the wood to size for a small fee, or sometimes for free. Once you have the timber, use basic tools to create your own sign post.

Things You'll Need

  • Sign post stake
  • 1/2-inch plywood sheet
  • Saw (optional)
  • Sander or sandpaper
  • Tack cloth
  • Hammer
  • Nails
  • Clamps
  • Wood filler
  • Putty knife
  • Spray paint
  • Level
  • Painter masking tape
  • Vinyl letter stickers

Making the Sign Post

  • Purchase a 2-by-4-inch sign post stake between 4 and 5 feet long from a home improvement store.

  • Cut or have a 1/2-inch plywood sheet cut into the size and shape desired. Keep the sign between 2 and 3 feet square or rectangular.

  • Sand the surface of the plywood using an electric sander or sandpaper. Sand with the direction of the grain until the surface is smooth. Sand around the edges of the plywood until smooth. Wipe the sanding dust away with a tack cloth.

  • Lay the 2-by-4-inch post on a flat surface. Place the plywood sheet smooth-side up so that the top of the plywood is flush with the top of the stake. Center the plywood over the post.

  • Clamp the plywood to the post at the top and the bottom so that it is secure. Nail the plywood to the post, driving a nail in every 6 inches. Make sure the nail heads are slightly below the surface of the plywood.

  • Spread wood filler over the nail heads with a putty knife to create a flat surface. Let the wood filler dry, then sand until flat. Wipe away sanding dust with a tack cloth.

  • Position the spray paint nozzle about 12 inches from the sign post. Spray on the first coat using long, even strokes. Spray a second and third coat in the same manner. Let dry.

Lettering

  • Write out on a piece of paper how the lines of text will look on the sign post. Keep in mind that lettering should be somewhat large and not cluttered, as a sign post is meant to be seen from long distances.

  • Position the level on the sign where the bottoms of the first line of letters will appear. Mark the area with a piece of masking tape that stretches across the entire sign board. Do this for the second and third line of letters, if necessary.

  • Lay the vinyl letter stickers on the board so that they sit on the line created by the masking tape. Do not stick the letters to the board yet. Position them in the center, then mark either side of the word or phrase with a small piece of masking tape. Do this for each line.

  • Peel the backing off the letters and stick them to the board, keeping within the constraints created by the masking tape. Remove the masking tape.

References

  • Photo Credit abstract, sign. no parking sign image by L. Shat from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Build a Mailbox Post

    A mailbox post can be built from brick, cinder block or wood. Of the three, the wooden mailbox post is the easiest...

  • How to Build an LED Sign

    An LED sign is an illuminated sign made with LED, or light-emitting diode, light bulbs which produce little heat and are energy...

  • How to Make a Campaign Poster for Kids

    Student council elections are a useful way for kids to learn the business of politics. If your child is running for office,...

  • Homemade Wooden Sign Post

    Add charm to your garden with a wooden sign post, or use it for special events to show guests where various items...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!