How to Thread a Serger 14U44

Save

The Singer 14u44 serger is a three- or fourh-thread serger machine manufactured in the late 1980s. It sews, trims and produces an overlock finish simultaneously. This serger sews twice as fast as a regular sewing machine, giving you a professional seam. The edge finish prevents raveling of the material. Threading a serger is a tedious task that requires patience. Always maintain the correct order of threading the machine.

Things You'll Need

  • 4 spools of thread
  • Sewing tweezers
  • Select the thread and place one spool on each of the thread posts at the top of the machine. Thread the machine in the following order: upper looper, lower looper, right needle and left needle. Extend the thread-guide pole to the highest level. Pass each thread through its pole thread guide from back to front.

  • Thread one spool at a time. Begin with the upper looper. Follow the red/orange color lines for the upper looper on the diagram. Ensure that the thread going through the tension dials seats firmly between the tension discs. Continue threading through the guides marked with a red/orange dot.

  • Thread the lower looper. Follow the yellow color lines for the lower looper. Pay special attention to the threading between the tension dial discs. Continue threading through the guides marked with a yellow dot.

  • Thread the right needle following the diagram and the thread guides with a green dot.

  • Thread the left needle following the diagram and the thread guides with a blue dot.

  • Pass the all four threads from the front to the back of the presser foot. Test the stitching using a scrap piece of material to ensure the threads are making a correct stitch.

Tips & Warnings

  • Always thread in the correct order.
  • Thread the needles last to avoid crossing the threads and causing the thread to break.
  • Consult the printed threading guide on the inside of the access door to the looper threading area in the front of the machine. Each thread guide is color-coded and shows the path for each thread.
  • Turn off your machine while threading to avoid unintentional movement of the loopers and fabric cutting knife.

References

  • "Singer Operators Guide"; The Singer Company Limited; 1987
  • "ABC's of Serging"; Tammy Young and Lori Bottom; 1992
  • Photo Credit white thread spools image by Sergey Lukianov from Fotolia.com thread image by Andrius Grigaliunas from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Thread a Janome Serger 644D

    Sergers are challenging to thread, and the Janome Serger 644D is no exception. New sergers are prethreaded in the factory, from the...

  • How to Use a Singer Tiny Serger

    The Singer Tiny Serger (model TS380 or TS380A) is an inexpensive, very basic serger. It does not provide the features of a...

  • How to Troubleshoot a Singer Serger

    Singer sergers are known for their durability and availability at department stores. While they can serge with accuracy and speed, they can...

  • How to Thread a Brother Serger

    A Brother Serger is a sewing machine that requires manual threading. You will need to thread the machine if the thread breaks...

  • How to Change Singer Serger Blades

    The Singer company offers a variety of serger sewing machines with a range of features and functions. There are models specifically designed...

  • How to Buy a Serger

    A serger is a type of sewing machine that can - among other functions - sew a seam, finish the seam's edges...

  • Euro Pro Serger Instructions

    Sergers made by Euro Pro are strong sewing machines that produce even stitches. The basic operation of the machine begins with needle...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!