How to Replace the Fuse in a Craftsman Electric Chain Saw 358.341180
Craftsman offers a number of different chainsaws, one of which is electric. If the chain on your Craftsman electric chainsaw stops moving when you press the trigger, you may have blown a fuse. Without a functioning fuse, your Craftsman chainsaw will not receive any power. To get your chainsaw working again, you will need to replace the fuse. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Unplug the chainsaw from the electrical power source.
-
2
Place the chainsaw on the floor or on a workbench.
-
-
3
Locate the fuse panel on the back of the chainsaw. Remove the fuse from the panel with a fuse puller or a pair of needle-nosed pliers.
-
4
Insert a new fuse into the fuse panel.
-
5
Plug the chainsaw back in to the power source.
-
6
Test the chainsaw by pulling on the trigger.
-
1
Tips & Warnings
If the chain does not operate after replacing the fuse, check to make sure that the trigger lockout button wasn't engaged.
Never attempt to replace the fuse in the chainsaw while it is still connected to a power source.
References
- Photo Credit chainsaw image by Andris Daugovich from Fotolia.com
More Like This
Comments
-
there is a switch inside the saw that needs to be tripped before it wi;; work..there is an opening on the otside of the saw to get at it..i don't know how or why it is there..
