How to Reset a Texecom Premier 24 Series House Alarm


If your Texecom Premier 24-Series House Alarm is activated, you'll need to reset the alarm before you can re-program it to the active mode. Resetting the system silences the alarm, if it is still audible. In some cases, you will not be able to reset the alarm yourself. This means that the alarm has been set as "Engineer-Reset Only."

  • Flip down the bottom cover to access the keypad. Enter your four-digit user code to silence the alarm.

  • Enter your user code again. Press the button marked "Reset." The screen should return to normal, which indicates the alarm is reset and ready for re-activation. If the display does not return to normal, your default settings may have been changed, which requires an additional procedure.

  • Write down the four-digit number displayed across the screen, if the alarm does not reset when you press "Reset." This procedure is known as an "Anti-Code Reset." Call the telephone number displayed on the screen and give the representative the four-digit code. He will give you a code to reset the system. Enter the code on the keypad and press "Reset."

  • If the system does not reset and does not display a four-digit code, the default settings have been changed to "Engineer Reset Only." This means you'll need to contact the telephone number displayed on the screen to arrange for someone to reset the alarm.

Related Searches

  • Photo Credit Jupiterimages/liquidlibrary/Getty Images
Promoted By Zergnet


You May Also Like

  • How to Reset a House Alarm

    Owning a house alarm can be an effective way to decrease the probability of an intruder entering your home because alarm systems...

  • How to Disable a Car Alarm

    In order to disable a car alarm, an individual will have to locate the horn that was put in and disconnect it,...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!