How to Connect Your Officejet 5600 to Your Computer Via DSL

The HP Officejet 5600 All-in-One Printer features the options to print color photos, scan copies of documents, and send faxes using a Digital Subscriber Line (DSL) connection. After installing the Officejet 5600 printer, users can set it up with a DSL connection using the phone cord that comes with the device. Users must also have a DSL filter in order to remove any digital signal that could interfere with faxes sent from the printer. After setting up the printer with DSL, it's best to complete the process by doing a test fax.

Things You'll Need

• HP Officejet 5600 All-in-One Printer

Instructions

1. Make sure that a DSL connection is fully set up in your home or office, and that you receive a DSL filter from your provider.

2. Connect one end of the phone cord that came in the printer box to your DSL filter. Connect the other end to the "1-LINE" port on the back of your printer.

3. Connect your DSL filter cord to the nearest telephone wall jack. Press the "ON" button on your printer. Make sure your printer is fully installed with the ink cartridges and paper loaded into the printer.

4. Press the "Setup" button on your printer and then press the "6" button. Press the "6" button again which will run a fax test.

5. Review the fax test report that prints and then press the "OK" button. Your printer will be ready for faxing using the DSL connection.

References

• HP: HP Officejet 5600 All-in-One series User Guide
• HP: HP Officejet 5600 All-in-One Printer Series Overview and Features