How to Install Vinyl Flooring Over Old Vinyl

Save

Vinyl flooring can be installed over most flat, solid surfaces—including previously laid vinyl. The main issue is to make sure that the existing vinyl is de-glossed, so the adhesive for the new vinyl will stick. It's also important that the existing vinyl be unbroken, with no ridges or cracks that might show through the new vinyl.

Things You'll Need

  • Vibrating sander
  • Medium sandpaper
  • Household cleaner
  • Mop
  • Chalk snap line
  • T-square
  • Flooring adhesive
  • Adhesive trowel
  • Vinyl tiles
  • Tile cutter
  • De-gloss the existing vinyl floor by going over it with your vibrating sander and medium sandpaper, until it doesn't brightly reflect light. Thoroughly mop the floor with a household cleaner. Let it dry.

  • Divide the floor into four even square sections by snapping two intersecting lines across it with your chalk snap line. Square the lines to each other at the intersection with a t-square as you snap the second line.

  • Spread flooring adhesive over a few square feet where the two lines intersect in the middle of the floor. Set four vinyl tiles in place at the intersection. (You should still be able to see the chalk lines through the mortar.)

  • Spread additional mortar and lay the rest of the tiles, using the lines as guides to keep the grid straight and building out toward the walls. Lay each tile by setting down one edge first, butted against the adjacent tile, then lowering the rest of the tile into place, so you're not squeezing adhesive up between the tiles.

  • Lay all the full tiles that will fit in the room. Let them set overnight. Install the final tiles around the edges of the room, measure each space and cut the tiles on your tile cutter to fit.

Tips & Warnings

  • If the existing vinyl flooring appears to be more than 20 years old, have a sample tested for asbestos at your local health department before sanding it.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!