How to Balance a Maytag Washing Machine


Over time, the constant vibration of a washing machine often causes the washer to come out of balance. Maytag washers have self-balancing feet on the rear that make balancing a straightforward process. After making adjustments on the front legs, simply release the rear legs by lifting the rear of the washer off the floor. This enables the rear legs to automatically adjust to the front when you lower the washer back down.

Things You'll Need

  • Adjustable wrench
  • 4-foot level
  • Lift the front of the Maytag washer and place a piece of wood under the front lip of the washer. Gently lower the washer onto the board.

  • Loosen the securing nuts on both front legs with an adjustable wrench. Turn the nuts one full turn counter-clockwise with the wrench.

  • Turn each leg clockwise until the top of the base is 1 inch from the bottom of the securing nut. Hold the nut with the adjustable wrench while turning the legs. Release the retaining nut and turn the legs clockwise until the nuts touch the bottom of the washer. Lift the front of the Maytag washer up and pull the board out. Lower the washer back onto the floor.

  • Grasp the washer from the middle of the control console and tilt the washer toward you until the rear of the washer is 6 inches off the floor. Listen for the rear leveling legs to click. Gently lower the washer back to the floor.

  • Place a 4-foot level across the front top of the washer. Adjust the front legs if necessary until the front is in balance. Loosen the retaining nut with the adjustable wrench and turn the feet as necessary until the front balances. Tighten the nut with the adjustable wrench.

Related Searches


  • Photo Credit Andrew Olney/Photodisc/Getty Images
Promoted By Zergnet


You May Also Like

  • Maytag Bravo Instructions

    The Maytag Bravo series of washers are top-loading machines with anywhere from seven to 11 different wash cycles, four to five different...

  • How to Level a Maytag Washer

    When installing a Maytag washer, good contact between the feet of the washer and the floor will help keep the machine from...

  • Troubleshooting a Maytag Washing Machine

    Washers wear out with age and use, often requiring you to troubleshoot the problem for a quick fix or to determine if...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!