How to Lay Brick Resin Patio Pavers


Brick resin patio pavers are much easier to install than regular brick pavers. They are designed with teeth that help sink and hold them firmly into the ground. However, they are harder to divide or cut, so you must carefully measure the area you want to pave. With this in mind, you should be able to complete a small to medium project over a weekend.

Things You'll Need

  • Measuring tape
  • Mallet (optional)
  • Sand, gravel or loose landscape material
  • Broom
  • Measure the area you want to pave carefully, using a measuring tape. Resin pavers cannot be easily cut like regular brick pavers. Make sure you have enough pavers to complete your project.

  • Level the ground in the project area and cover it with sand, gravel or loose ground material for best results, according to Home Depot. If using on grass, install pavers after a cropped mowing.

  • Press the pavers into place. Either use a mallet, or step on the pavers if the ground is soft enough.

  • Cover the pavers with sand, gravel or loose ground material, and sweep it into the joints with a broom to hold the pavers firmly in place.

Related Searches


  • Photo Credit wavy brick walkway. See more in my portfolio image by astoria from
Promoted By Zergnet


You May Also Like

  • How to Install Pavers

    For those tired of asphalt and blacktop, there is an answer. If you're looking to jazz up your driveway, patio or walkway,...

  • How to Lay Patio Pavers

    When designing your landscape, consider installing brick pavers to create a sidewalk, steps or a patio area. This is a fun weekend...

  • How to Install a Brick Paver Patio

    Outdoor rooms are a wonderful way to add square footage to your home. You can take a plain old patio and turn...

  • How to Cut 14 Faux Brick Panel Sheets

    Using faux brick offers many advantages over real brick, including weight, price and ease of installation. Faux brick literally means fake brick,...

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!