How to Repair a Broken Vacuum Belt
Vacuum cleaners are one of the essential tools for cleaning our homes. It's an appliance some of us can't do without. Vacuum cleaners have been such a great innovation in our homes that when they start to show signs of failure, having them repaired would mean a whole different expense, when the real problem could be just a broken, but replaceable, part. A common issue on vacuum cleaners is a broken belt
Other People Are Reading
Instructions
-
-
1
Unplug the vacuum cleaner. Turn the vacuum on its side or upside-down, and unscrew the bottom piece that covers your cleaner's mechanism, using a screwdriver. Take note of your vacuum's make and model. This will make it easier for you to find an exact replacement belt.
-
2
Clean the vacuum once it is opened. Remove any dirt or unnecessary things that could be stuck inside the vacuum. Once done, remove the broken belt, but don't throw it away yet. Usually, the belt has a serial or identification number, or its specifications printed on it. These details will also help you find a replacement.
-
-
3
Place the new belt where the old one was.
-
4
Secure the belt by hand, following the directions in your owner's manual. Once the belt is secure, check for tension in the belt. A good tension means that the belt is stretched tight, but not too tight to completely block movement. Check for any loose parts that might need to be tightened.
-
5
Screw the cover piece back on, using the screwdriver.
-
1
