Constant shifting, overloading and abuse can take a toll on sofa legs. The majority of them are held in place with threaded bolts inserted into T-nuts -- which are nuts with teeth. The most common problem with sofa legs arises when teeth in the T-nut lose their grip. Another problem occurs when the leg becomes cracked or split, causing the bolt to loosen. Simple repair options exist to keep your sofa on its feet for years to come.
Going Nuts
Video of the Day
Step 1
Tip the sofa on its back. Unscrew the leg and remove it using your fingers with a counterclockwise motion. Tap the T-nut back into place on the couch frame with a hammer. Screw the leg back onto the couch. If the leg remains wobbly or tilted, unscrew and remove it.
Video of the Day
Step 2
Pry the T-nut out of the couch frame using a screwdriver. Insert a matching T-nut into the hole and hammer it flush with the frame. Screw the leg back onto the sofa using the new T-nut. If the leg remains wobbly, unscrew the leg and remove it. Pry the T-nut out of the frame.
Step 3
Place the T-plate on the couch frame, inserting the protruding end into the hole from the T-nut. These are special T-plates designed for sofa legs and are square with a threaded hole in the center. Tap the T-plate flush with the hammer. Insert 1-inch screws in each of the four drilled holes in the plate. Drive the screws into the frame using a drill/driver. Screw the leg back onto the frame using the new T-plate.
Cracked Up
Step 1
Tip the couch on its back. Unscrew the leg using a counterclockwise motion.
Step 2
Grasp the base of the bolt with pliers. Unscrew the bolt from the leg.
Step 3
Insert the tip of a putty knife into any crack or split and pry it apart. Apply glue to the crack or split. Rub the glue into the crack with your finger until saturated. Remove the putty knife.
Step 4
Drill a hole through the leg using a drill/driver and 3/8-inch bit. Drill perpendicular to the crack, all the way through the leg. If the crack is longer than 4 inches, drill two, evenly spaced holes.
Step 5
Apply wood glue to the hole. Place a clamp across the crack and apply pressure. Insert a 3/8-by-3-inch dowel into the hole. Tap the dowel with a hammer until the dowel extends equally from both sides of the leg. Allow the glue to dry for at least one hour and remove the clamp.
Step 6
Cut off the exposed ends of the dowel using a coping saw. Sand the ends lightly using 100-grit sandpaper. Color the ends of the dowels with a matching putty crayon.
Step 7
Screw the threaded bolt back onto the leg. Screw the leg back onto the sofa frame.