How to Make Stencils With Microsoft Word

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Stencil fonts have connectors in the letters, making them easier to cut.
Image Credit: Tashatuvango/iStock/Getty Images

With your home printer and a little ingenuity, you can design and print all sorts of stencils using Microsoft Word. Your only limitation is the size of your printer, since home printers usually don't accommodate anything wider than 11 inches. Planning is the most important element. Further, make sure your lines are thick enough that they will allow you to trace or paint over the stencil while getting the effect that you want.

Advertisement

Step 1

Decide what the size of your stencil should be. With most home printers, you're limited to letter or legal sized paper, so for a large stencil you may need to put a word on each page.

Video of the Day

Step 2

Download a stencil font you can use with Microsoft Word. Stencil fonts make it easier to cut out letters like "O" and "A." Microsoft offers a stencil font for sale, but you can also download one for free from a font gallery website (see Resources).

Advertisement

Step 3

Launch a new document in Microsoft Word. Use the rulers on the top and side of the document as a guide to ensure the stencil is the appropriate size. If you aren't using a stencil font, select the "Bold" option for the font you are using. Bold fonts are thicker than regular fonts, making them easier to cut out.

Advertisement

Step 4

Drag and drop from your computer any original artwork you want to use for the stencil. You can also insert Word Art and Clip Art in Word.

Step 5

Print your stencil on some cardstock, which you can get in any office supply store. Standard printer paper tends to tear easily when you use it for tracing and is even worse if you are going to paint over the stencil.

Advertisement

Advertisement

Step 6

Place the stencil on a relatively soft surface, like a piece of plywood or a plastic cutting mat. Using a pencil, draw connectors from the outside edges of any holes in your design to the outside edges. For example, the letter "O" should have two connectors from the inside edge of the lines to the outside, so when you cut it out you won't be left with a big empty circle.

Step 7

Cut out the stencil using a hobby knife. For straight edges, place a ruler against the line to ensure your edges are neatly cut.

Video of the Day

Advertisement

Advertisement

references & resources

Report an Issue

screenshot of the current page

Screenshot loading...