How to Program a Keyless Entry for a 1999 Honda CR-V
Keyless entry remotes for vehicles like the Honda CR-V can be programmed or reprogrammed in just minutes from your vehicle. Using only the remote itself and your ignition key, you can have your remotes ready for use immediately. A programmed remote will allow you convenient access to your Honda's door locks, trunk, panic alarm and engine starter, all from as far as a couple hundred feet away.
Other People Are Reading
Instructions
-
-
1
Enter your CR-V with your keyless entry remote and the ignition key and insert the ignition key into your car's ignition.
-
2
Turn the key to the "On" position and press the "Lock" and "Unlock" buttons simultaneously on your keyless remote.
-
-
3
Turn the key back to the "Lock" position.
-
4
Repeat Steps 1 through 3, ending in the "Lock" position after the second cycle.
-
5
Turn the ignition back to the "On" position again and press the "Lock" and "Unlock" buttons on your remote until the car responds by cycling the locks.
-
6
Press the "Lock" and "Unlock" buttons on any additional remotes you need to program, waiting until the locks cycle after each remote.
-
7
Turn the key in the ignition back to the "Lock" position to end the programming sequence.
-
1
References
- Photo Credit keyless remote image by Ray Kasprzak from Fotolia.com
