How to Initialize a Memory Card on a Fujifilm Digital Camera
By Quinten Plummer
Updated September 15, 2017
Items you will need
Fujifilm digital camera
Memory card
Manual
Initializing, or formatting, the contents of your memory card erases all of the data stored on the card--whether it's pictures, music or movie clips, it's gone. Initializing is helpful in cases where the data on the card may be corrupt or when you need to set up a memory card, as some cards have to be formatted before use. This guide will help you initialize your memory card and start from a clean slate, but don't forget to back up your data.
Power the camera on. Press and hold both the "Mode" button located on the top right of the camera and the "Trash" icon located on the back left of the camera.
Look for the letters "FOR" to appear on the LCD screen, then release the buttons. After releasing the two buttons, pause for a few seconds then hold them again.
Allow the initialization to complete. Do not press any buttons while the camera is in the formatting process. Once it is done formatting you may resume using the card and the camera.
Tips
Consult your manual if you have any troubles. Some Fujifilm cameras deviate slightly from the steps listed here.
Warnings
Never disrupt the camera's power while formatting a memory card. Remember to back up any pictures you wish to keep before formatting. Formatting not only removes pictures, but it removes everything on the card.
Writer Bio
Quinten Plummer began writing professionally in 2008. He has more than six years in the technology field including five years in retail electronics and a year in technical support. Plummer gained his experience in music by producing for various hip-hop acts and as lead guitarist for a band. He now works as a reporter for a daily newspaper.