DIY LED Lighting for Camper Trailers

LED lights are a growing fad in camper trailer units.

Light Emitting Diodes (LED) are the new wave of lighting in cars, houses and now even camper trailers. They are more expensive than normal bulbs but are more energy efficient and last a lot longer; therefore, they are ultimately not so expensive in the long run. They come in various grades or wattage, depending on what your intended use is for the LED light.

Things You'll Need

• Screwdriver
• Ratchet and sockets

Instructions

Replace the Bulb

1. Remove the lens cover from the existing light fixture by unscrewing the screws.

2. Remove the old bulb by twisting it out of the socket. Place the new bulb in the socket.

3. Replace the lens and screws back into the fixture.

Replace the Whole Fixture

1. Turn off any electrical power to the camper trailer. Remove the lens cover with a screwdriver. Unscrew the light bulb. Depending on the fixture, you may need to unscrew or unbolt it.

2. Disconnect the wires running to the fixture.

3. Connect the wires to the new fixtures, matching polarity.

4. Fasten the new fixture into place with screws or bolts. Install the LED bulb, and replace the lens.

References

• Bruce Osborn's DIY LED Lighting for RVs