×

How to Remove Caulk From Cultured Marble

Shae Hazelton

Caulk is a sealant used with many bathroom fixtures to prevent water from leaking into areas it shouldn’t. After time, caulk may begin to peel and become unattractive, which can mar the classy appearance of your cultured marble (polyester resin mixed with marble dust) fixtures.

Removing caulk from your cultured marble may seem daunting, but can be done with ease.

When the caulk becomes dingy or ineffective, it may be time to remove it from your fixtures. Don’t concern yourself with calling a professional, though. Removing caulk is a task you can undertake on your own.

  1. Coat the caulk with a caulk-removing solution. Most bottles come in a simple applicator that makes it easy to spread over the caulk. Let the caulk remover sit for the appropriate amount of time indicated on the package.

  2. Scrape the caulk out of the crevice using a utility knife. Keep a tight hold on the knife so that it does not slip and damage your cultured marble fixture. The first layers of caulk should fall away quickly, but the deeper layers may require more effort to remove.

  3. Pull the last strands of the caulk out of its crevice with a pair of needle-nose pliers. For crevices too small for the pliers to work, scrape them out with the utility knife. Use caution if you need to scrape out the remnants of caulk, though, or you may damage your cultured marble.

  4. Soak an abrasive pad with Stoddard solvent (also known as mineral spirits). Wash over the cultured marble with the abrasive pad. The Stoddard solvent will remove the residue left by the caulk.

  5. Tip

    Wash your hands thoroughly after handling the caulk. Old caulk can have mildew buildup after extended exposure to a moist environment.

    Warning

    Wear gloves when you handle the Stoddard solvent. Rinse off any solvent on your skin at the next opportunity.

The Drip Cap

  • Caulk is a sealant used with many bathroom fixtures to prevent water from leaking into areas it shouldn’t.
  • Pull the last strands of the caulk out of its crevice with a pair of needle-nose pliers.
  • Use caution if you need to scrape out the remnants of caulk, though, or you may damage your cultured marble.