How to Reprogram a Keyless Remote for a 2004 Nissan 350Z

Reprogram the keyless remote for you 2004 Nissan 350Z.

Most cars on the market today come standard with a keyless remote entry system. Keyless entry allows the driver to unlock doors from a distance. If you've replaced the battery on your keyless remote for your 2004 Nissan 350Z, you may need to reprogram it. You can also program any additional remotes at the same time.

Instructions

1. Sit in the driver's seat and close the door. Make sure all the doors are closed.

2. Press the driver's side lock/unlock button to lock all the doors.

3. Put the key in the ignition and take it out. Do this six times within a 10 second window. If you did it right, the hazard lights will flash.

4. Put the key in the ignition and turn it to the "On" or "ACC" position. Do not start the engine. If you do, start over.

5. Press any key on your keyless remote within five seconds of putting in the "ACC" position. Your hazard lights will flash again.

Tips & Warnings

• To program any additional remotes, unlock and then lock the doors again using the driver's side button. Then press any key on the remote you are programming within five seconds. Again, the hazard lights will flash. Continue to do this with each remote you need to program.

References

• Program Your Remote: 2004 Nissan 350Z