We all need to drink water to live. Many people have filters on their taps to ensure that the water they drink is clean. Pur has developed pitchers that can filter water for you. These filters disinfect water from microorganisms and other impurities. Although Pur makes great products, occasionally the filters of the pitchers malfunction. If it is not time to change the filter entirely, below are tips on how to diagnose and repair the problem.
Things You'll Need
- Mild soap
Unfiltered and Filtered Water Mix
Remove the filter. Twist the filter to the left to unscrew it from its position in the Pur water pitcher. Pull the filter out of the pitcher.
Clean the filter and the pitcher thoroughly with cold water and mild soap. Dry each piece very well.
Screw the filter back into place. Twist the filter to the right to set it back in place. Make sure that the filter is secured tightly to the pitcher.
Unfiltered and Filtered Water Comes Out When You Pour
Fill the pour tray with water until the pitcher is almost full.
Wait for the water to drain through the filter. You must wait for the entire pour tray to be filtered before you use the pitcher.
Pour fresh, filtered water out of the pitcher. You will see that there will be no unfiltered water mixed in.
Tips & Warnings
- Change the filter every 2 months for optimum results.
- Only use the filter for cold water. Hot water can damage the filter.
- Photo Credit glass pitcher with soda-water and lemon slices image by Maria Brzostowska from Fotolia.com
How to Clean Pur Water Filters
Pur water filters need to go through a cleaning process before you can install them on your sink or inside the Pur...
Pur Water Filter With Indicator Instructions
The Pur water filter with an electronic indicator is a water purification system for your home. The unit consists of a pitcher...