Sporting shooters are well accustomed to performing routine maintenance and cleaning of their firearms after every use. At times, more extensive repair or maintenance may be required that is usually performed by a gunsmith. Replacing the stock on a rifle or shotgun is one of the tasks that usually falls to the gun shop. However, the Remington 11-87 is simple enough for you to replace, so you can avoid the expense of hiring a specialist.
Things You'll Need
- Phillips screwdriver
- Needle-nose pliers
Unload your shotgun outdoors, and double-check it to ensure all the rounds have been emptied from the chamber. Leave the action open to better ensure the barrel remains free.
Remove the two Phillips-head screws from the butt plate pad at the rear of the butt stock.
Remove the butt pad and plate from the stock. Apply slight pressure to the pad to loosen any adhesive that may have been used during assembly.
Remove the action spring tube nut and lock washer made accessible when you removed the stock pad. Remove the nut with a standard pair of needle-nose pliers by fitting the tips into the nut. Turn the nut counter-clockwise to unscrew and remove.
Remove the stock from the shotgun body by grasping the body in one hand and slightly working the stock side to side with the other while pulling it away from the gun housing.
Install the new stock by sliding it onto the action tube and into the gun body. The stock end to be fitted into the gun body is milled to fit precisely.
Reinstall lock nuts and action spring tube nut in the same order in which they were removed. Tighten the nut by hand until snug, then completely tighten with needle-nose pliers to secure the stock to the gun body.
Replace the butt stock pad mount and pad to the new gun stock. Insert the Phillips-heads screws and securely tighten them with a Phillips screwdriver.
Tips & Warnings
- Using the right tool for the job will ensure a high-quality repair
- Never handle a firearm without first ensuring it is unloaded completely.
- Never perform cleaning or maintenance on a firearm in the vicinity of other people or pets.
- Photo Credit gun and shells image by CraterValley Photo from Fotolia.com
How to Repair a Cracked or Broken Shotgun Stock
Being able to repair a cracked, chipped or broken shotgun stock is a valuable piece of knowledge for most hunters and shooting...
How to Replace the Firing Pin in a Remington Model 1100
If you pull your Remington 1100 semi-automatic shotgun's trigger and the only thing you hear is a click, it's likely that there...
How to Take Apart a Remington 1100
The Remington 1100 shotgun features a semi-automatic action and tubular magazine. After firing a round, gas pressure pushes the carrier back and...